|
|
|
|
KaysteamClick the individual drawing to magnify
Reverse Flame SeriesAll dimensions and relevant connections are in mm.
Boiler Design
The
Reverse Flame Series are 3-pass
design. The first and second passes occur within the combustion chamber
and the third pass through smoke tubes. Internal
access is through an elliptical manhole at the top of the boiler and three mud
doors are also provided. Access to the combustion chamber and smoke tubes is by a hinged gas tight door at the front, which is lined with a heat-resisting, insulating refractory. Access
through bolted doors is also available at the rear of the boiler. Each boiler
shell is insulated to the relevant British Standard. Boiler Mountings (standard)
Boiler Controls (standard)
Maintenance
The
boiler tubes and furnace should be cleaned as required depending on the type of
fuel used and the frequency of operation but in no circumstances should it be
cleaned less than once per annum.
We supply a comprehensive book with all boilers. Water Treatment
Generally
speaking, it is advisable for suitable water treatment to be carried out on all
steam boilers where any quantity of make-up water is required at regular
intervals. The correct treatment will be advised by the company who will be
supplying the water equipment. Gas Reversal Chamber Series and Low Pressure Series. Details on request. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2007 HOVAL Ltd |
